Best Sql For Mac

Posted By admin On 16.02.22

More than any other, web based applications are always under a constant threat of attacks. It is, therefore, fundamental to ensure that the system is fully secure ant thus prevent putting the content of your database at risk. In this article, we will review some of the leading SQL injection scanners. As a result, this will act as a guide for the programmers when it comes to choosing an appropriate software for their protection.

  1. Free Sql For Mac
  2. Best Sql Database For Mac
  3. Best Sql Tool For Mac


Thanks a lot 🙂 you are the best. I’ll use OTN VirtualBox image for testing and learning as you mentioned. Thanks again. January 7, 2015 at 11:26 am. SQL Dev running on the Mac, connecting to the VirtualBox VM, also running on the Mac. Note that I have port forwarding setup. RazorSQL is an SQL query tool, database browser, SQL editor, and database administration tool for Windows, macOS, Mac OS X, Linux, and Solaris. RazorSQL has been tested on over 40 databases, can connect to databases via either JDBC or ODBC, and includes support for the following databases.


Arachni is a leading web security scanner that forms an ideal SQL injection scanner. The software is simple, friendly, powerful and above all free making it the most ideal and natural choice for the majority of the users. At the same time, the software is multi-platform and thus no restrictions.


Zaproxy is a project by several international developers who do it on voluntary basis making it free. With this tool, you can be able to find vulnerability automatically in your system and thus get a remedy for the same. This makes it a great tool for seasoned penetration testers, especially with manual testing.


SqlMap is an SQL injection scanner that is used for penetration testing. With this tool, automation can be done in the process of detecting and exploiting the SQL injection. The software comes with lots of feature including command line to make it the best tool in this category.

Sql Power Injector

SQL Power Injector is an SQL injection scanner that is used by penetration testers to detect and exploit the SQL injections available in a web page. The tool is currently compatible with the majority of the common SQL servers. With this scanner, the process of identifying the exploits are made far less painful.

SubGraph – Vega

SubGraph – Vega is a great vulnerability testing software that can be used as an SQL injection scanner though it still has loads of other applications that it is capable of. It is freeware and open source thus making it available to virtually everybody and also allowing constant development.


Grabber is a vulnerability scanning software that can serve as an SQL injection scanner. The tool at the same time can be used for a variety of other scanning use. With this tool, it is possible to do file inclusion, cross-site scripting, and file backup check thus presenting a complete solution.


NetSparker is a premium SQL injection scanner that offers a solution to the evolving and modern age web attacks. With this tool, there is a complete sense of assurance and more so with the businesses that deal with very critical data and information. The software is notably easy to use.

Most Popular Software for 2016 – Janusec

WebCruiser Web Vulnerability Scanner by Janusec is an amazing SQL injection scanner for the ultimate security of your website. The tool offers an effective as well as a powerful way of performing penetration tests. Other than scanning of vulnerabilities, the tool can also be used for proof of concept. You can also see Video Enhancement Software

What is SQL Injection Scanner?

An SQL injection scanner is a program that attempts to assist developers of web pages in testing them for penetration. With this kind of scanners, users are able to ensure the safety of their web pages. As a result, it guarantees that the content of their database remains private. At the current environment, the use of this kind of software has become even more important especially owing to the fact that cyber threats are more real than it previously was. You can also see Attendance Tracking Software

With the majority of the testers that are available currently, it is possible to handle the majority of the upcoming threats to your website.The tools available in this category are very diverse, partly, this is an indicator of how much of a threat SQL injection poses. With this kind of detailed review, you can now be in a position to effectively settle on a preferred scanning application. It is also possible to use a combination of them.

Related Posts

Active10 months ago

How can I connect to a remote SQL server using Mac OS X? I don't really need a GUI, but it would be nice to have for the color coding and resultset grid. I'd rather not have to use a VM.


Is there a SQL client for Mac OS X that works with MS SQL Server?


closed as not constructive by casperOneJul 3 '12 at 13:47

As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance. If this question can be reworded to fit the rules in the help center, please edit the question.

25 Answers

Let's work together on a canonical answer.

Native Apps


  • Oracle SQL Developer (free)
  • SQuirrel SQL (free, open source)
  • DBeaver (free, open source)
  • SQL Workbench/J (free, open source)
  • Metabase (free, open source)
  • Netbeans (free, open source, full development environment)


(TODO: Add others mentioned below)

The Java-based Oracle SQL Developer has a plugin module that supports SQL Server. I use it regularly on my Mac. It's free, too.

Here's how to install the SQL Server plugin:

  • Run SQL Developer
  • go to this menu item: Oracle SQL Developer/Preferences/Database/Third-party JDBC Drivers
  • Click help.
  • It will have pointers to the JAR files for MySQL, SQL Server, etc.
  • The SQL Server JAR file is available at

This will be the second question in a row I've answered with this, so I think it's worth pointing out that I have no affiliation with this product, but I use it and love it and think it's the right answer to this question too: DbVisualizer.

I thought Sequel Pro for MySQL looked pretty interesting. It's hard to find one tool that works with all those databases (especially SQL Server 2005 . . . most people use SQL Server Management Studio and that's Windows only of course).

When this question was asked there were very few tools out there were worth much. I also ended up using Fusion and a Windows client. I have tried just about everything for MAC and Linux and never found anything worthwhile. That included dbvisualizer, squirrel (particularly bad, even though the windows haters in my office swear by it), the oracle SQL developer and a bunch of others. Nothing compared to DBArtizan on Windows as far as I was concerned and I was prepared to use it with Fusion or VirtualBox. I don't use the MS product because it is only limited to MS SQL.

Bottom line is nothing free is worthwhile, nor were most commercial non windows products

However, now (March 2010) I believe there are two serious contenders and worthwhile versions for the MAC and Linux which have a low cost associated with them. The first one is Aqua Data Studio which costs about $450 per user, which is a barely acceptable, but cheap compared to DBArtizan and others with similar functionality (but MS only). The other is RazorSQL which only costs $69 per user.Aqua data studio is good, but a resource hog and basically pretty sluggish and has non essential features such as the ER diagram tool, which is pretty bad at that. The Razor is lightning fast and is only a 16meg download and has everything an SQL developer needs including a TSQL editor.

So the big winner is RazorSQL and for $69, well worth it and feature ridden. Believe me, after several years of waiting to find a cheap non windows substitute for DBartizan, I have finally found one and I have been very picky.

My employer produces a simple, proof-of-concept HTML5-based SQL client which can be used against any ODBC data source on the web-browser host machine, through the HTML5 WebDB-to-ODBC Bridge we also produce. These components are free, for Mac, Windows, and more.

Applicable to many of the other answers here -- the Type 1 JDBC-to-ODBC Bridge that most are referring to is the one Sun built in to and bundled with the JVM. JVM/JRE/JDK documentation has always advised against using this built-in except in experimental scenarios, or when no other option exists, because this component was built as a proof-of-concept, and was never intended for production use.

My employer makes an enterprise-grade JDBC-to-ODBC Bridge, available as either a Single-Tier (installs entirely on the client application host) or a Multi-Tier (splits components over the client application host and the ODBC data source host, enabling JDBC client applications in any JVM to use ODBC data sources on Mac, Windows, Linux, etc.). This solution isn't free.

All of the above can be used with the ODBC Drivers for Sybase & Microsoft SQL Server (or other databases) we also produce ...

Squirrel SQL is a Java based SQL client, that I've had good experience with on Windows and Linux. Since it's Java, it should do the trick.

It's open source. You can run multiple sessions with multiple databases concurrently.

I vote for RazorSQL also. It's very powerful in many respects and practically supports most databases out there. I mostly use it for SQL Server, MySQL and PostgreSQL.

DbVisualizer supports many different databases. There is a free edition that I have used previously. Download from here

I have had good success over the last two years or so using Navicat for MySQL.The UI could use a little updating, but all of the tools and options they provide make the cost justifiable for me.

I like SQLGrinder.

It's built using Cocoa, so it looks a lot better and feels more like an Mac OS X application than all the Java-based application mentioned here.

It uses JDBC drivers to connect to Microsoft SQL Server 2005, FrontBase, MySQL, OpenBase, Oracle, PostgreSQL, and Sybase.

Free trial or $59.

I use the Navicat clients for MySQL and PostgreSQL and am happy with them. 'good' is obviously subjective... how do you judge your DB clients?

I've been using Oracle SQL Developer since the Microsoft software for SQL Server is not currently available on Mac OS X. It works wonders. I would also recommend RazorSQL or SQLGrinder.

I use AquaFold at work on Windows, but it's based on Java and supports Mac OS X.

I've used (DB Solo) and I like it a lot. It's only $99 and comparable to many more expensive tools. It supports Oracle, SQL Server, Sybase, MySQL, PostgreSQL and others.

Not sure about open-source, but I've heard good things about (not tried it, I prefer to write Python scripts to try things out rather than use GUIs;-).

When this question was asked, Microsoft's Remote Desktop for OS X had been unsupported for years. It wasn't a Universal Binary, and I found it to be somewhat buggy (I recall that the application will just quit after a failed connection instead of allowing you to alter the connection info and try again).

At the time I recommended the Open Source CoRD, a good RDP client for Mac.

Since then Microsoft Remote Desktop Client for Mac 2 was released.

I use Eclipse's Database development plugins - like all Java based SQL editors, it works cross platform with any type 4 (ie pure Java) JDBC driver. It's ok for basic stuff (the main failing is it struggles to give transaction control -- auto-commit=true is always set it seems).

Microsoft have a decent JDBC type 4 driver: this can be used with all Java clients / programs on Win/Mac/Lin/etc.

Those people struggling with Java/JDBC on a Mac are presumably trying to use native drivers instead of JDBC ones -- I haven't used (or practically heard of) the ODBC driver bridge in almost 10 years.

Free Sql For Mac

It may not be the best solution if you don't already have it, but FileMaker 11 with the Actual SQL Server ODBC driver ( worked nicely for a client of mine today. The ODBC driver is only $29, but FileMaker is $299, which is why you might only consider it if you already have it.

This doesn't specifically answer your question, because I'm not sure in any clients exist in Mac OS X, but I generally just Remote Desktop into the server and work through that. Another option is VMware Fusion (which is much better than Parallels in my opinion) + Windows XP + SQL Server Management Studio.

I've used Eclipse with the Quantum-DB plugins for that purpose since I was already using Eclipse anyway.

Ed: phpMyAdmin is for MySQL, but the asker needs something for Microsoft SQL Server.

Most solutions that I found involve using an ODBC Driver and then whatever client application you use. For example, Gorilla SQL claims to be able to do that, even though the project seems abandoned.

Most good solutions are either using Remote Desktop or VMware/Parallels.

Best Sql Database For Mac

Try CoRD and modify what you want directly from the server.

It's open source.

For MySQL, there is Querious and Sequel Pro. The former costs US$25, and the latter is free. You can find a comparison of them here, and a list of some other Mac OS X MySQL clients here.


Since there currently isn't a MS SQL client for Mac OS X, I would, as Modesty has suggested, use Remote Desktop for the Mac.

Best Sql Tool For Mac

Not the answer you're looking for? Browse other questions tagged sql-servermacos or ask your own question.